RUFFSTUFF SPECIALTIES REAR DISC BRAKE KIT FORD STERLING REAR AXLE 84-94 F250

REAR AXLE DISC BRAKE CONVERSION
1984-1994 FORD STERLING REAR AXLE

PART # R2055


WILL FIT JEEP/TOYOTA AXLE CONVERSIONS

(THIS IS DESIGNED TO BE A UNIVERSAL KIT FOR AXLE CONVERSIONS.
DOES NOT INCLUDE PROVISIONS FOR E-BRAKE/PARKING BRAKE,
AND THERE MAY OTHER COMPONENTS REQUIRED FOR COMPLETION)

The Ford Sterling rear axle Disc Brake Complete Conversion Kit! The Sterling are becoming a very popular conversion due to the strength, they are even a tad stronger than a GM 14 Bolt axle. Fits 84-94 axle only.
The Sterling axle was installed in many Ford trucks in the 3/4 - 1 Ton range from the late 1980's until the late 1990's. Changing from Drums brakes to disc brakes is easy, and all the parts you need to complete the conversion of your rear axle are included in this kit.
Complete Kit Includes:
1 Pair Ford Sterling Disc Brake Brackets with Grade 8 Bolts
2 Weld on Brake Line Tabs
2 Brake Line Clips
2 New Brake Calipers
2 Hydraulic Hoses with 10mm Banjo Bolt Fittings
4 New Brake Pads
2 New Rotors
*NOTE* Rotor installs onto the backside of the hub!

A Proportioning Valve is recommended, this will allow you to fine tune your front/rear stopping power bias.

On some you will need to space the bracket from the mounting flange 1/8", it is not year specific. It is likely to be that they were made slightly different for 3/4 ton and 1 ton but we have not been able to identify which.

Address