RUFFSTUFF SPECIALTIES CUSTOM BUILT TOYOTA 8" HOUSING FOR PICKUP 4RUNNER TACOMA
3237 Rippey Rd # 200
Loomis, CA 95650
Visa, MasterCard, Discover, American Express, Paypal
RuffStuff Specialties has available custom made axle housings for any vehicle application. Staring off with the center section made of 1/4" steel plating in 12 bends, all welded together for a strong shell. A 3/8" flange for the 3rd member face is attached to the shell, and 3.5" x .375" wall tube is used for the axle tube welded to the case. They are available in many different configurations to match front or rear of the vehicle. For the front, an offset long and short side is built to your specifications (driver or passenger drop), and rear is based on if you want the axles to be the same length, or the pinion shaft centered.
Additional options are available, including axle housing reinforcements (trusses and armor), 3rd members with locking differentials, axle shafts, and brakes (based on GM 3/4 ton brakes).
Front options can include inner "C" attachments for the knuckles, Reid Racing high steer knuckles, spindles, and locking hubs or drive flanges.
Rear axle options can include full float spindles, and disc brakes.
Since each application is a custom build, these will require at least 4 weeks to build. Specifiactions needed are the WMS (Wheel Mounting Surface) measurement, center pinion or equal axle length (rear), differential drop side (front), and options chosen.
PRICE WILL VARY DEPENDING ON CHOICE OF OPTIONS
This axle housing is very tough, rough enough to install on the most aggressive offroad race trucks!